Thrust-resisting ring Fig. 5330

Water supply pipe network

Exchange valves, cast iron pipes (in accordance with EN 545) and fittings with cast spigot end can be connected to the pipe via flange-thrust-resisting ring (longitudinal positive locking)

Push the flange onto the pipe with clamping ring (2), pressure ring (3) and rubber sleeve (4). Push the complete flange up to the mating flange (5), with the rubber sleeve (4) and the pressure ring (3) protruding by approx. 10 mm beyond the pipe end. Tighten screws crosswise until the joint is tight.
Caution: Do not use any additional flange seals.